Our Portfolio


BauerTKP excel at high-density designs, packing analog features into digital boards, utilizing every square millimeter of the board space and finding solution where the others quit. Take a brief glance at our past projects to have a feel of the engineering capabilities of BauerTKP.

Industrial Dual Smart Battery Tablet Computer Motherboard



  • CompuLab CM-iTC CoM based carrier board
  • External interfaces: HDMI, USB Host, USB Device, Power Input (19V)
  • Internal interfaces: mSATA, mPCIE, 2x Smart Battery, LVDS LCD, Resistive Touch Panel
  • Dual Smart Battery Charger

Multichannel Communication Device


Multichannel Communication Device
  • CompuLab CM-iTC CoM based carrier board
  • External interfaces: 1GbE, HDMI, USB, 4x SIM card
  • Internal interfaces: 5x PCIE, 1x SIM card, mSATA, 1x GbE
  • Automotive range power input with spike protection up to 80V (without power disconnect) and load dump protection
  • Smart ON/OFF scheduling

Mobile Pocket Gadget with LCD and Touch Panel


Mobile Pocket Gadget with LCD and Touch Panel
  • CompuLab CM-T3517 CoM based carrier board
  • 3.2" TFT LCD
  • Resistive touch panel
  • 2x USB2.0 ports, 1x USB OTG port
  • Li-Po battery (1 cell)
  • Charging via USB OTG socket
  • SD and microSD sockets
  • Onboard vibro motor

Smart User Interface Controller


Smart User Interface Controller
  • Carrier board for CompuLab CM-T3730 CoM
  • Multiple LCD support: LVDS, PRGB
  • Capacitive and Resistive TP support
  • Universal extension for future LCD models
  • 1GbE Port
  • Automotive range power input
  • Modbus interface
  • Support for all CompuLab's CM-Txxxx modules

Powerful Industrial Tablet PC


Powerful Industrial Tablet PC
  • COM Express Carrier Board
  • Customer's proprietary hardware integrated
  • Half-SATA SSD
  • 1GbE ports (external, internal)
  • Li-Po Battery Power
  • LVDS LCD with brightness control
  • Capacitive touch screen
  • Wi-Fi, Audio, USB interfaces
  • Automotive range power input

Pico-ITX Sized QSeven Industrial Computer 


Pico-ITX Sized QSeven Industrial Computer
  • QSeven Carrier Board
  • 3 1Gbit Ethernet ports
  • Half-SATA, external SATA (incl. power for HDD), eUSB support
  • EPI LVDS connector
  • 16-bit GPIO port
  • ACPI support
  • 4 USB2.0 ports (2x USB-A, 2x eUSB)
  • RTC rechargeable battery
  • 12V DC power input

Tablet PC Backbone



Backbone for Industrial CoM-Based Tablet PC
  • Intel Atom CPU @ 1.6GHz
  • 2GB DDR2
  • 10.4" LCD with Touch Panel
  • 3000mAh 2-cell Li-Po Battery with charger
  • WiFi, BT, 1000-BaseT LAN
  • Serial port
  • 4 USB ports
  • Sata SSD
  • SD Card Slot
  • 1W Stereo Speakers, Microphone, Sound I/O
  • 2MP Autofocus Camera

Multi-Display Pentium IV Based Computer-on-Module




120 x 90 mm high performance embedded PC.
  • Non-mobile Pentium-IV CPU (60W thermal design power) and its 70 Amper 2-phase voltage regulator
  • 512 Mbyte DDR SDRAM (both onboard and socketed), 1024 Mbyte Flash Disk on-board
  • ATI MOBILITY RADEON dual-head graphics controller with 2 x CRT, Parallel RGB, LVDS, TV out, C/Y TV interfaces
  • 2 10/100BaseT LAN ports
  • Serial port
  • 4 USB ports
  • HDD controller, GPIO interface
  • PS/2 ports
  • Sound I/O
Board space utilization >89%.
Heat sink design (900 sq.cm surface area).

P-III Mobile Based Computer-on-Module



 Extra-small (99 x 69 mm) high performance embedded PC.
  • Pentium-III CPU, 256 Mbyte SDRAM, 1024 Mbyte Flash Disk on-board
  • PCI, LPC and AC97 buses
  • SXGA graphics controller, CRT interface
  • 2 x 10/100BaseT LAN controllers
  • Sound sub-system
  • USB ports, UART ports
  • LPT port, GPIO
  • HDD and FDD controllers
  • PS/2 controller
Board space utilization >80%.
Heat sink design.

Mini-ATX Form Factor CoM Carrier Board


Mini-ATX form-factor carrier board for the module above. Provides interface connectors and adds features not included within the module.
  • PCI and CNR slots
  • CRT monitor connector
  • USB connectors
  • Serial port connectors
  • LPT, GPIO, PS/2 connectors
  • HDD and FDD connectors
  • 2 x 10/100BaseT LAN sockets
  • Audio jack connectors
  • Lithium battery for RTC
  • 2 x Card Bus (PCMCIA) slots
  • IrDA module

PC/104+ Compliant System (CoM + Carrier Board)


A PC/104+ compliant computer consisting of a CPU module and a baseboard which adds more features. Numerous features with their corresponding interface connectors are packed within the 96 mm x 91 mm system.
  • Pentium-III CPU
  • 384 Mbyte SDRAM (both onboard and socketed), 512 Mbyte Flash Disk, Dual BIOS
  • SXGA graphics controller, interfaces for  LCD panel and CRT monitor
  • PC/104 (ISA) and PC/104+ (PCI) expansion buses
  • Two serial ports with RS232/RS485/RS422/TTL driver options
  • 2 USB ports, LPT port, GPIO interface
  • HDD and FDD controllers
  • PS/2 keyboard and mouse ports
  • IrDA Transceiver
  • Sound I/O
  • 2 10/100BaseT LAN ports
  • Dual Card Bus / PCMCIA slots
Module board space utilization >85%.
Heat sink design.